Fin Refrigerator Evaporator Coil (FP)

March 18, 2024

Model NO.: FP-300

Tube Type: Smooth Tube, Thread Tube

Maximum Working Pressure: 3.0MPa

Tube Wall Thickness: 0.35mm

Fin Type: Window Fin, Wave Fin,Flat Fin

Trademark: Shenglin

Transport Package: Wooden Packing

Specification: ROHS, BV, SGS, ISO

Origin: Shanghai, China

HS Code: 8415909000

Model NO.: FP-300

Tube Type: Smooth Tube, Thread Tube

Maximum Working Pressure: 3.0MPa

Tube Wall Thickness: 0.35mm

Fin Type: Window Fin, Wave Fin,Flat Fin

Trademark: Shenglin

Transport Package: Wooden Packing

Specification: ROHS, BV, SGS, ISO

Origin: Shanghai, China

HS Code: 8415909000

The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing

Fin Pattern	Copper Tube O. D. (mm)	Row Space(mm)	Hole Space(mm)	Fin Thickness(mm)	Fin Space(mm)
Fin Pattern	Copper Tube O. D. (mm)	Row Space(mm)	Hole Space(mm)	Fin Thickness(mm)	Flat fin	Sine wave with blade fin	Smooth sine wave fin	Window fin	Sesamoid fin
A	7	12.7	21	0.105	/	/	1.3	1.3	/
B	7	13.2	17.6	0.105	/	/	1.3	1.3	/
C	7	12.7	20.4	0.105	/	/	1.3~1.8	1.3~1.8	/
D	7.94	15.88	25.4	0.105	1.8~3.0	1.8~3.0	1.8~3.0	1.8~3.0	/
E	9.52	22	25.4	0.105~0.15	1.6~3.2	1.6~3.2	1.6~3.2	1.6~3.2	/
F	9.52	22	25.4	0.18~0.4	3.5~6.35	/	/	/	/
G	9.52	21.65	25	0.105~0.18	1.6~3.2	1.6~3.2	1.6~3.2	1.6~3.2	/
H	9.52	21.65	25	0.15~0.24	3.2~6.35	3.2~6.35	3.2~6.35	/	/
I	12.75	27.5	31.75	0.115~0.15	1.5~3.5	1.5~3.5	1.5~3.5	1.5~3.5	1.6~3.2
J	15.88	33	38.1	0.115~0.15	1.5~4.0	1.5~4.0	1.5~4.0	/	/
K	15.88	34.64	40	0.115~0.15	/	2.6~3.5	2.6~3.5	/	/

Contact me

Ruby Yang

Mobile: +86 15538183231

The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing

Fin Pattern	Copper Tube O. D. (mm)	Row Space(mm)	Hole Space(mm)	Fin Thickness(mm)	Fin Space(mm)
Fin Pattern	Copper Tube O. D. (mm)	Row Space(mm)	Hole Space(mm)	Fin Thickness(mm)	Flat fin	Sine wave with blade fin	Smooth sine wave fin	Window fin	Sesamoid fin
A	7	12.7	21	0.105	/	/	1.3	1.3	/
B	7	13.2	17.6	0.105	/	/	1.3	1.3	/
C	7	12.7	20.4	0.105	/	/	1.3~1.8	1.3~1.8	/
D	7.94	15.88	25.4	0.105	1.8~3.0	1.8~3.0	1.8~3.0	1.8~3.0	/
E	9.52	22	25.4	0.105~0.15	1.6~3.2	1.6~3.2	1.6~3.2	1.6~3.2	/
F	9.52	22	25.4	0.18~0.4	3.5~6.35	/	/	/	/
G	9.52	21.65	25	0.105~0.18	1.6~3.2	1.6~3.2	1.6~3.2	1.6~3.2	/
H	9.52	21.65	25	0.15~0.24	3.2~6.35	3.2~6.35	3.2~6.35	/	/
I	12.75	27.5	31.75	0.115~0.15	1.5~3.5	1.5~3.5	1.5~3.5	1.5~3.5	1.6~3.2
J	15.88	33	38.1	0.115~0.15	1.5~4.0	1.5~4.0	1.5~4.0	/	/
K	15.88	34.64	40	0.115~0.15	/	2.6~3.5	2.6~3.5	/	/